Camera(Lens/Shutter/Contrast) Tester

Lens tester – FD-30N

It measures the difference of against the focal length of master lens.
It measures contrast of lens.
The lens which can measure is F = 10-75mm(OPEN).
Can change the sensitivity of 16 steps according to the lens.
From a telephoto zoom till a wide angle.
It changes “OPEN” and “F8″ quickly, and can measure.
With a PC, it can be set up and measured. (RS-232C)

Lens tester – LFM-1

You can know the rate of lens flare by using a integrating sphere.
Can measure a various lens by changing black body and pin hole.
Can also measure the relative illumination.
With a PC, it can be set up and measured.

Lens tester – SMD-81T2

It measures an difference of against the standard caliber about aperture of the camera or lens.
It judges by measuring the quantity of light which is passing the aperture from parallel light.
Can measure the both posture of the horizontal or vertical.

Shutter tester – 7FR-80D

It measures by reflection method.
It measures the exposure time, shutter speed etc of the focal plane shutter at 3 points.
It can measure the digital camera of finished product.
It measures exactly up to 1/8000 seconds.

Contrast Tester – CT-1

It measures a contrast of ink used for a liquid crystal panel and others.
With the exclusive software, you can control it and can get the data.
It can reproduce the measurement environment by selecting out of the light source of 3 type.
If you change the luminance meter, it can measure a x-y or a spectrum.