This focusing module is convenient for optical coupling of semiconductor lasers (LD) and semiconductor optical amplifiers (SOA), and also optical coupling experiments of various waveguides in the optical communication wavelength band or in a range from near-infrared to visible wavelength region.
This module is designed to place a Φ2.5-mm tip as close as possible to the element.
Features
- Highly efficient LD light focus
- Highly efficient optical coupling to waveguides
- Small-sized for easy implementation
- Easy selection of specifications and options depending on applications
Variations
Various types of focusing modules are successfully developed to handle special magnification or wavelength.
Please refer to the following list for an introduction to some of the variations.
Built-In Isolator Type
Features
Primarily suitable for use in the communication bandwidth (1300 nm and 1550 nm)
(Please contact us for other wavelengths.)
– Capability to control reflection from fibers ends and elements
– Polarization type and polarization-independent type are also available options.
Built-In Polarizer Type
Features
– Use in a range from visible region to the telecommunication band
(Please specify a center wavelength to be used.)
– Suitable for focusing to polarization-dependent elements
Built-In Rotating Linear Polarization Mechanism Type
Features
– Use in a range from visible region to the telecommunication band
(Please specify a center wavelength to be used.)
– Focusing of linearly polarized light with high extinction ratio in an arbitrary direction
Typical Specifications
| Model | CLMA | |||||
| (1)Wavelength | 15: 1550nm 13: 1310nm | |||||
| 10: 1060nm 98: 980nm | ||||||
| 85: 850nm 78: 780nm 65: 650nm | ||||||
| Insertion Loss | < 0.8dB(excluding adapter connection loss) | |||||
| Reflection Attenuation Amount | > 50dB (1.5μm, 1.31μm) | |||||
| > 40dB(near-infrared to visible ranges to warrant the design) | ||||||
| Single-Mode Type | (2) Spot Diameter | 1.8 | 2.8 | 3.9 | 4.5 | 6.3 |
| (1310 and 1550 nm) | (μm)*1 | |||||
| W.D. (mm) | 0.3 | 0.3 | 0.3 | 1 | 1.7 | |
| (3)Optical Fiber *3 | S: SMF P: PMF ( L=1.0m ) | |||||
| Dispersion Shift Type | (2) Spot Diameter | 2.2 | 3.1 | 3.6 | 5 | 5.8 |
| (1550 nm) | (μm)*1 | |||||
| W.D. (mm) | 0.3 | 0.3 | 0.3 | 1 | 1.7 | |
| (3)Optical Fiber *3 | D: DSF (L=1.0m) | |||||
| Near-Infrared to Visible Ranges | (2) Spot Diameter | Please specify a spot diameter and a W.D. of your choice | ||||
| (μm)*1 | We will consider your request to optimize our proposal. | |||||
| W.D. (mm) | ||||||
| (3)Optical Fiber *3 | We propose wavelength-suitable fibers. | |||||
| (4) Line Type | 3: Φ3mmPVC cord 9: Φ0.9mm fibers | |||||
| (5) Optical Connector | F: FC/SPC S: SC/SPC | |||||
| FA: FC/Angled PC SA: SC/Angled PC | ||||||
| (6) Extinction Ratio | none: > 20dB 25: >25dB(only at the time of PMF selection) | |||||
| (7) Built-i n Optics *2 | Not Coded: None IA: Polarization Type Built-In ISO | |||||
| IB: Non-Polarization Type Built-In ISO P: Polarizer | ||||||
