■ SMD-81T2
It measures an difference of against the standard caliber about aperture of the camera or lens.
It judges by measuring the quantity of light which is passing the aperture from parallel light.
Can measure the both posture of the horizontal or vertical.
Can change the each FNo. by switch.
Can switch the sensitivity of the measuring caliber at 4 steps.
Can communicate with PC.
Specifications
| Use | Supports production line of interchangeable lens |
| To be measured | [1]Apertures of Shutter camera [2]Apertures of focal-plane shutter [3]Apertures of interchangeable lens [4]Aperture diameter at the time of contact to flash sync contact or at the time of electronic flash emission of light |
| Display | Indicates an error of a diaphragm Indication value:-2.00-+2.00(EV) |
| Measurement range | F.No: F1.4-F32 |
| Lens diameter | φ80mm (SMD-100T2 is φ100mm) |
| Measurement accuracy | Below+/-3[%] |
| External control | RS-232C, USB |
| Power supply | AC100V, 50/60Hz |
| Dimensions | 320(W) 750(H) 280(D)mm |
| Weight | 12.0Kg |
